China Chemical Machinery International Co.,Ltd

Item No.	Item Name	Specification	Quantity&Brand

Part 1	Single Screw Extruder	ASJ45/28	1 set


1.1	Main Motor	11kw	Siemens

	Frequency Converter	Frequency Conversion Control Main Motor	YingWei Prance， Dongyuan
1.2	Reduction Gears	Well-known Domestic Brand：Variable Frequency Control	Changzhou
	Bearing, Oil Seal and Main Standard Unit	The use of top brand to ensure the reduction gear and gear box high strength, compact structure, smooth operation, low noise and efficient performance
1.3	Screw Structure	FES 45/28	YiSiJun
	Screw Diameter Ratio	28:1
	Screw Rotation Speed	About 60r/min；43r/min
	Screw Marterial	38CrMoALA and processed by high temperature nitriding. Nitriding depth:0.3-0.6 Hardness(HV):740-940 Surface roughness≤0.8um	YiSiJun（Special Powder Screw）

1.4	Screw Tubes Marterial	38CrMoALA and processed by high temperature nitriding. Nitriding depth: 0.4~0.7. Hardness（HV）740-940, Surface roughness≤0.8um	YiSiJun（Joint Venture）
1.5	Air Cooling		3


	Thermocouple		K type
	Temperature Control System (Import Brand)	Temperature Difference ±1℃，Cast Aluminum Heating， Protected with stainless steel cover	Omron
1.6	Heating Power/Section	6kw/4	4
	Screw Tubes Heating Section		4
	Screw Tubes Cooling Section		3
1.7	Die-Head Connection Section		2
1.8
1.9
1. 10	Extrusion Output
	Main Engine	20-45kg/h（Depend on the process, formula, etc）	PVC

1.11	Range of Extruded Material	PC.PVC, PMMA, ABS, etc
1.12	Main Engine Control System	YiSiJun standard button operating system
1.13	Temperature-controlled Meter	Omron Temperature-controlled Meter
1.14	Frequency Converter	YingWei Prance，Dongyuan





Part 2	Customer Personalization Requirements Item
	Control System	CNCT	Chint
	Contactor	CNCT
	Relay	Omron

Auxiliary Part

Type
No.	Project Details	Technical Parameters
I	Calibrator Unit	Compact
1.1	Length	5M
2.6	Height of extrusion center	1000mm
	Vacuum Pump	1.5kw

II	Cutting Machine
9	Cut Mode	Circular saw knife cutting	Micro-tooth cutting saw
10	Cutting Saw Diameter	Ø240
11	Cutting Accuracy	±3 mm
12	Cutting Motor	1.5kw
Ⅲ	Material Tumbling Frame
	Length	6M
	Material Tumbling Way	Automatic Material Tumbling

七、General Terms：

I	Basic technical parameters of equipment
1	If there is no special requirement, the color and appearance of the equipment will be carried out according to YiSiJun standards, and the main components will be executed according to national standards
2	Equipment Warranty：12 month after the equipment arrives at the customer’s factory
3	Voltage; Frequency	380V, 50HZ
4	Packaging	Simple Packaging

II	The customer confirms the color of the equipment	Rustproof Spray Treatment
1	Equipment Frame	Undetermined
2	Door plank of equipment	Undetermined
3	Protection Cover	Undetermined
4	Others	Undetermined